The fiber optic fast connector is a highly innovative field termination connector that includes factory-installed fiber, pre-cast ceramic ferrule, and a mechanical connection mechanism. The introduction of fiber or indoor fiber inserted into the mechanical connection mechanism can be, without the help of other tools, termination process as long as 2 minutes or so, greatly saving the installation time. Fiber optic fast connectors on the market today can be terminated with single-mode fiber and multimode fiber with diameters of 250 μm, 900 μm, 2.0 mm and 3.0 mm
Common problem of "normal quality fast connector"
1: High failure rate : the rate of one time success is not high, the insertion loss is large,
and the fiber matching Gel is easy to lost.
2:Short lifetime: the product don't work well after few days
3:With incomplete statistics, various types of faults are as high as 10%.
C:Our Non_Fused connector system effectively solves the problem Aboved
1: Ferrule is the most important component of Fiber Connectors
We use good quality Ceramic Ferrule
2: We Use high quality Special optical grease in stead of norma quality Maching Gel
The laboratory shows that the average loss time is >25 years,
and the physical docking requirements of the fiber can be well maintained during the lifetime.
3: Precise V-Grooves and high concentric level to guarantee the low insert loss and high return loss
4: assembly time ≤ 1 minute, stable connection rate can reach 98% or more
5: 5 years failty rate can be as low as 2%, working life is more than 15 years
Specifications
| Applicable for | 3.1x2.0mm drop cable or 3.0/2.0 cable |
| Optical fiber diameter | φ125um (657A&657B) |
| Tight buffer diameter | φ250um |
| Fiber mode | Single mode |
| Operation time | About 10s (exclude fiber cut) |
| Insert loss | ≤0.3dB (1310nm & 1550nm) |
| Return loss | ≥40dB |
| Fastening strength of naked fiber | >4N |
| Tight clamping force cladding | >8N |
| Tensile strength | >50N |
| Using temperature | -45ºC~+80ºC |
More design
